ABL electronic Scamax 5000 - Manual (Page 29)

Scanner Options Scamax 2600 / 5000
DpuScan
5.3.4 Level and Mode Output – "Print Flags" Tab
The fourth tab allows the user to select how the Sequential ID, the level, the mode, and the flags
should be printed.
Illustration 10 – Print Flags
Sequential ID The Sequential ID (running number) can be printed with 8 digits, aligned
to the left or to the right, with leading zeros, or of variable length.
Level /
Mode Mode and Level can be printed with 2 digits aligned, aligned to the left or
to the right, with leading zeros, or of variable length.
Momentary Flag /
Latched Flag The Momentary and the Latched Flag can be printed this way:
If they are set – as "1", or as "M" or "L"
If they are not set – as "0", as a blank, or just left out ("not in use”).
Page 29 of 42