ABL electronic Scamax 5000 - Manual (Page 27)

Scanner Options Scamax 2600 / 5000
DpuScan
5.3.3 How to Print Counters
Here, you configure the format to print counts of the counters on a document after being scanned.
Illustration 9 – Print Counter
It is required that the user selects a field width unequal to 0 on the Counter Modes tab. In the
Illustration above (Counter D), the Roll Number has a field width of 0, and thus it is not in use.
Print Format Each counter with a field width unequal to 0 can be used to be printed on
the page that was just scanned. If the field width is 0, the counter will be
disabled.
Within the selected field width, the print can be aligned to the left or right,
padded with zero, or unformatted.
You can choose different formats, but the entire length of all counters and
delimiters to be printed are limited for technical reasons.
The result of the chosen format can be seen as a preview ("Numeric
Fields").
The order of the counter is predefined and fixed.
Page 27 of 42