ABL electronic Scamax 5000 - Manual (Page 41)

Scanner Options Scamax 2600 / 5000
DpuScan
5.5.3 Device Control
Illustration 16 – Device Control
Stop Scanning This stops the scanner before the next sheet. The current sheet will be
sent to the application unless it is not dropped.
Discard the Sheet
(front and rear side) If enabled, the document (front and rear side) will not be sent to the host.
Do not increment the
automatic counters This suppresses the automatic counting in Step 5 of the procedure as
seen in the previous chapter.
Endorser on /
Endorser off
This enables or disables the endorser from the next sheet on, and the
current sheet is not affected.
If different rules enable and disable the endorser, the latter rule takes
precedent.
Page 41 of 42