HP Scitex FB700 Industrial Printer - Manual (Page 31)

Position and eject options
The sheet-fed printing option Position/Eject, on the Printer Options menu, enables you to control
how images are positioned and whether the automatic sheet eject feature is enabled. By selecting
Auto Eject Off, you can save media by combining print jobs that are smaller than the sheet size onto
the same sheet, instead of on separate sheets. In this mode, you can print the jobs one after the
other, or “nest” them across the width of the media in rows. Position/Eject is available when the
printer is configured for sheet-fed media.
● Position options — for print jobs with a width that is less than the width of the media, you can
control where the image is positioned (flush left, flush right, centered, or nested).
● Eject options — for sheet fed jobs, you can control whether the media is ejected after each job to
the output side, input side, or not automatically ejected (Auto Eject Off).
● Nested output — when you set Eject to Auto Eject Off, and Position to Nested, the print jobs
are nested onto the media until all jobs are printed or there is no more room on the sheet.
Figure 4-2 Position options with Auto Eject Off
ENWW Position and eject options 25