HP Scitex FB700 Industrial Printer - Manual (Page 80)

Figure 9-19 Location of carriage wheels
D
C
A
B
E
1. Raise the rail by selecting the following from the printer’s control panel: System page > Tools >
User Cleaning and Maintenance > Clean Carriage Wheels.
2. Press Proceed to continue.
The rail and the output roller will raise to the maximum height. You can move the carriage to any
position on the rail that is convenient for cleaning.
3. Clean the top service-end wheel by placing an IPA (Isopropyl alcohol) moistened cotton swab
against the side of the wheel (A in photo below) and moving the carriage back and forth about
10 cm (4 in).
Figure 9-20 Location of carriage wheels
74 Chapter 9 User cleaning ENWW