HP LaserJet M5025 Multifunction Printer series - Manual (Page 61)

Menu item Sub-menu item Values Description
Medium (default)
Dark
curves, and edges. All print resolutions, including
FastRes 1200, benefit from REt.
Economode Enabled
Disabled (default)
When Economode is enabled, the device prints with a
reduced amount of toner per page; however, the print
quality of the page is slightly reduced.
Toner Density Choose from a range of 1
to 5.
3 is the default.
Lighten or darken the print on the page. 1 is the lightest
and 5 is the darkest.
Calibration/Cleaning Auto Cleaning Enabled
Disabled (default)
When auto-cleaning is on, the device prints a cleaning
page when the page count reaches the value that is set
in
Cleaning Interval .
NOTE Available on the HP LaserJet
M5035X and HP LaserJet M5035XS MFP.
Cleaning Interval 1000 (default)
2000
5000
10000
20000
Set the interval when the cleaning page should be
printed. The interval is measured by the number of
pages printed.
NOTE Available on the HP LaserJet
M5035X and HP LaserJet M5035XS MFP.
Auto Cleaning Size Letter
A4
Select the size of paper used for the cleaning page.
NOTE Available on the HP LaserJet
M5035X and HP LaserJet M5035XS MFP.
Create Cleaning Page Create (button) Generate a page for cleaning excess toner off the
pressure roller in the fuser. The page has instructions
that guide you through the cleaning process.
NOTE Not available when an automatic
duplexer is installed.
Process Cleaning Page Process (button) Process the cleaning page that was created by using
the
Create Cleaning Page menu item. The process
takes up to 2.5 minutes.
If an automatic duplexer is installed, this item creates
the cleaning page and processes it.
Table 2-15 Print Quality menu (continued)
ENWW Use the Administration menu 49