HP LaserJet M5025 Multifunction Printer series - Manual (Page 64)

Menu item Sub-menu item Sub-menu item Values Description
Finishing Paper Path
Test Stapling Finishing Options Choose from a list of
available options. Test paper handling features for the finisher.
Select the option that you want to test.
Media Size Letter
Legal
A4
Executive (JIS)
8.5 x 13
Select the paper size for the Finishing Paper
Path Test.
Media Type Select the paper type for the Finishing Paper
Path Test.
Copies Select the number of copies to include in the
Finishing Paper Path Test.
Duplex Off
On
Select whether to use the duplexer in the
Finishing Paper Path Test. The default
setting is 2 copies.
Test Page Print (button) Print a test page to use for the Finishing
Paper Path Test.
Stacking Media Size Letter
Legal
A4
Executive (JIS)
8.5 x 13
Select the options that you want to use to test
the stacker.
Media Type Select from a list of
types. Select the type of media to use for the
Finishing Paper Path Test.
Copies Select the number of copies to include in the
Finishing Paper Path Test. The default
setting is 2 copies.
Duplex Off
On
Select whether to use the duplexer in the
Finishing Paper Path Test.
Test Page Print (button) Print a test page to use for the Finishing
Paper Path Test.
Manual Sensor Test Test the device sensors and switches for
correct operation. Each sensor is displayed
on the control-panel screen, along with its
status. Manually trip each sensor and watch
for it to change on the screen. Press the Stop
button to abort the test.
Component Test Exercise individual parts independently to
isolate noise, leaking, or other issues. To start
the test, select one of the components. The
test will run the number of times specified by
the
Repeat option. You might be prompted to
remove parts from the device during the test.
Press the
Stop button to abort the test.
Table 2-16 Troubleshooting menu (continued)
52 Chapter 2 Control panel ENWW