HP StorageWorks XP Remote Web Console Software User Manual
Page 110
relationship established with Dataset 3 is withdrawn. There are two relationships before executing
the FCWITHDR command; after executing the FCWITHDR command there is only one relationship.
Figure 66 FCWITHDR Command Processing (TDEVN Specified, DDSW = NO, XTNTLST Specified)
(for Example 2A)
is another example of the command description for Case 2. Similar to the previous
example, this example requests the withdrawal of all the relationships established with the copy
target extents included in the specified extents within the device numbered 4203.
Figure 67 Example 2B: FCWITHDR Command Description (TDEVN Specified, DDSW = NO, XTNTLST
Specified)
FCWITHDR TDEVN(X'4203') XTNTLST(X'00000000' X' 0000000E' X'20000000' X' 2000000E')
By executing the command described in
, the relationship established with the specified
target, Dataset 3, is not withdrawn because the specified extent within the device numbered 4203
is only a part of Dataset 3 as shown in
110
Performing Version 2 Operations