HP StorageWorks XP Remote Web Console Software User Manual
Page 57
1
If a TrueCopy for Mainframe M-VOL is in pending status and you execute an ICKDSF command for Version 2, the
ICKDSF job will end abnormally with CC=12 error. For information on how to avoid that abnormal ending, see
2
If you establish a Version 2 relationship with the FREEZE option when a Version 2 S-VOL and a TrueCopy Synchronous
for Mainframe R-VOL are shared, the results of Version 2 operations and TrueCopy Synchronous for Mainframe operations
will be as follows:
•
Results of Version 2 operations
When the status of a TrueCopy Synchronous for Mainframe pair is Suspend, the command will end normally, and
you can establish a Version 2 relationship. However, when the status of a TrueCopy Synchronous for Mainframe pair
is either Duplex of Pending duplex, the command will be rejected and you cannot establish a Version 2 relationship.
•
Results of TrueCopy Synchronous for Mainframe operations
If a Version 2 relationship is established with the FREEZE option and if a TrueCopy Synchronous for Mainframe R-VOL
is in the extended long busy (ELB) status, the command to create or resume a pair will be rejected. However, the
command to suspend or delete a pair will be executed normally.
When you use a Version 2 S-VOL as the TrueCopy for Mainframe R-VOL, configure the system as follows:
•
Connect the different hosts to the main storage system and remote storage system, or connect the host of the main
storage system to both the main and remote storage systems.
•
Use the Fibre Channel interface to connect the main storage system with the remote storage system.
3
You cannot establish the Version 2 relationship because the data consistency of the Version 2 T-VOL will not be insured.
However, this system configuration differs from the system configuration that is used when IBM
FlashCopy Version 2 and PPRC are used in conjunction with one another.
describes whether or not you can perform the Reverse Restore when you share the
Version 2 S-VOL and the volume of a TrueCopy for Mainframe pair.
Table 30 Whether Reverse Restore Can be Performed When a Version 2 S-VOL is Used as a TrueCopy
for Mainframe Volume
Status of TrueCopy for Mainframe Pair
Shared TrueCopy for Mainframe Pair Volume
Suspend
Pending duplex
Duplex
Yes
1
Yes
1
Yes
1
M-VOL
TrueCopy Synchronous for Mainframe
No
No
No
R-VOL
Yes
1
No
No
M-VOL
TrueCopy Asynchronous for
Mainframe
No
No
No
R-VOL
1
You can perform Reverse Restore when you specify the following options:
•
DFSMSdss : FCTOPPRCPRIMARY (You cannot perform Fast Reverse Restore when you specify DFSMSdss.)
•
TSO : TGTPPRIM(YES)
•
ICKDSF : TGTOKASPPRCPRIM(YES)
•
ANTRQST Macro TGTPPRIM(YES)
shows whether Fast Reverse Restore can be performed when you share the Version 2
S-VOL and the volume of a TrueCopy for Mainframe pair.
Table 31 Whether Fast Reverse Restore Can be Performed When a Version 2 S-VOL is Used as a
TrueCopy for Mainframe Volume
Status of TrueCopy for Mainframe Pair
Shared TrueCopy for Mainframe Pair Volume
Suspend
Pending duplex
Duplex
Yes
1
Yes
1
Yes
1
M-VOL
TrueCopy Synchronous for Mainframe
No
No
No
R-VOL
Interoperability With Other Products and Functions
57