Installing tray 2 – HP Officejet Pro K550 Printer User Manual
Page 19
Installing tray 2
Tray 2 can hold up to 350 sheets of plain paper. It comes with the HP Officejet Pro K550dtn and HP
Officejet Pro K550dtwn printers, and is an optional accessory for the HP Officejet Pro K550 printer.
See
for ordering information.
To install tray 2
1.
Unpack the tray, remove the packing tapes and materials, and move the tray to the prepared
location. The surface must be sturdy, level, and located in a well-ventilated area. Allow space
around the printer, including 50 mm (2 inches) for ventilation.
2.
Turn off the printer, and disconnect the power cord.
3.
Set the printer on top of the tray.
CAUTION
Be careful to keep your fingers and hands clear of the bottom of the printer.
4.
Connect the power cord and turn on the printer.
ENWW
Installing tray 2
11