HP Officejet Pro K550 Printer - Manual (Page 51)

Check the media size
● Content on a page might be cut off if the document size is larger than the media that you are
using.
● Make sure the media size selected in the printer driver match the size of media loaded in the tray.
● If you are using a computer running Windows, select Emulate LaserJet Margins in the printer
driver to scale the document to fit the media size currently selected. See
Changing print settings .
Check the margin settings
▲ If the text or graphics are cut off at the edges of the page, make sure the margin settings for the
document do not exceed the printable area of your printer. See
Setting minimum margins .
Check the page-orientation setting
▲ Make sure the media size and page orientation selected in the application match the settings in
the printer driver. See
Changing print settings .
Check the printer location and length of USB cable
▲ High electromagnetic fields (such as those generated by USB cables) can sometimes cause
slight distortions to printouts. Move the printer away from the source of the electromagnetic
fields. Also, it is recommended that you use a USB cable that is less than 3 meters (9.8 feet)
long to minimize the effects of these electromagnetic fields.
If the above solutions do not work, the problem may be caused by the inability of the application to
interpret print settings properly. See the release notes for known software conflicts; or refer to the
application's documentation, or contact the software manufacturer for specific help.
ENWW Resolving printing problems 43