HP Officejet Pro K550 Printer - Manual (Page 23)

Transparencies
● Insert transparencies with the rough side down and the adhesive strip pointing towards the back
of the printer.
● Use the Best mode to print transparencies. This mode provides longer drying time and ensures
that the ink dries completely before the next page is delivered to the output tray. Allowing wet
media to stack up may cause smearing.
Custom-sized media
● Use only custom-sized media supported by the printer.
● If your application supports custom-sized media, set the media size in the application before
printing the document. If not, set the size in the printer driver. You might need to reformat
existing documents to print them correctly on custom-sized media.
Understanding specifications for supported media
NOTE Tray 2 comes with the HP Officejet Pro K550dtn and HP Officejet Pro K550dtwn
printers.
Understanding supported sizes
Media size Tray 1 Tray 2 Duplex unit
Standard paper sizes
U.S. Letter* (216 by 279 mm; 8.5 by 11 inches)
8.5 by 13 inches (216 by 330 mm; 8.5 by 13 inches)
U.S. Legal* (216 by 356 mm; 8.5 by 14 inches)
A4* (210 by 297 mm; 8.3 by 11.7 inches)
U.S. Executive* (184 by 267 mm; 7.25 by 10.5 inches)
U.S. Statement* (140 by 216 mm; 5.5 by 8.5 inches)
B5* (182 by 257 mm; 7.17 by 10.12 inches)
A5* (148 by 210 mm; 5.8 by 8.3 inches)
Envelopes
U.S. #10 Envelope (105 by 241 mm; 4.12 by 9.5 inches)
Monarch Envelope (98 by 191 mm; 3.88 by 7.5 inches)
HP Greeting Card Envelope (111 by 152 mm; 4.38 by 6 inches)
ENWW Selecting print media 15