HP ProLiant DL380p Gen8 Server - Manual (Page 11)

Component identification 11
Systems Insight Display LEDs
The HP Systems Insight Display LEDs represent the system board layout. The display enables diagnosis with
the access panel installed.
Item Description Status
1
Power cap Off = System is in standby, or no cap is set.
Solid green = Power cap applied
2 NIC link/activity Off = No link to network. If the power is off,
view the rear panel RJ-45 LEDs for status
("
Rear panel LEDs and buttons " on page
14 ).
Flashing green = Network link and activity
Solid green = Network link
3 AMP status Off = AMP modes disabled
Solid green = AMP mode enabled
Solid amber = Failover
Flashing amber = Invalid configuration
4 Over temp Off = Normal
Solid amber = High system temperature
detected
— All other LEDs Off = Normal
Amber = Failure
For more information on the activation of
these LEDs, see "Systems Insight Display
LED combinations (on page
12 )."