HP ProLiant DL380p Gen8 Server - Manual (Page 98)

Software and configuration utilities 98
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or in
both modes.
Software or configuration utility Server mode
HP iLO (on page 98 ) Online and Offline
Active Health System (on page 99 ) Online and Offline
Integrated Management Log (on page 100 ) Online and Offline
Intelligent Provisioning (on page 100 ) Offline
HP Insight Diagnostics (on page 101 ) Online and Offline
HP Insight Remote Support software Online
HP Insight Online Online
Erase Utility (on page 101 ) Offline
Scripting Toolkit (on page 102 ) Online
HP Service Pack for ProLiant (on page 102 ) Online and Offline
HP Smart Update Manager (on page 102 ) Online and Offline
HP ROM-Based Setup Utility (on page 103 ) Offline
Array Configuration Utility (on page 105 ) Online and Offline
Option ROM Configuration for Arrays (on page 107 ) Offline
ROMPaq utility (on page 107 ) Offline
HP product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (
http://www.hp.com/go/productbulletin ).
HP iLO Management Engine
The HP iLO Management Engine is a set of embedded management features supporting the complete
lifecycle of the server, from initial deployment through ongoing management.
HP iLO
The HP iLO subsystem is a standard component of selected HP ProLiant servers that simplifies initial server
setup, server health monitoring, power and thermal optimization, and remote server administration. The HP
iLO subsystem includes an intelligent microprocessor, secure memory, and a dedicated network interface.
This design makes HP iLO independent of the host server and its operating system.