Remove the hot-plug fan cage – HP ProLiant DL380p Gen8 Server User Manual
Page 26
Advertising
Operations 26
2.
Open the cable management arm. Note that the cable management arm can be right-mounted or
left-mounted.
Remove the hot-plug fan cage
To remove the component:
1.
Power down the server (on page
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend ("
Extend the server from the rack
" on page
) or remove the server from the rack.
4.
Remove the access panel (on page
5.
Advertising