HP PSC 1417 All-in-One Printer - Manual (Page 24)

Make the HP All-in-One the default printer
You can set the HP All-in-One as the default printer to use from any software
application. This means that the HP All-in-One is automatically selected in the printer
list when you select Print from the File menu in a software application.
Windows 9x or 2000
1.
On the Windows taskbar, click Start, point to Settings, and then click Printers.
2. Right-click the HP All-in-One icon, and click Set as default printer.
Windows XP
1.
On the Windows taskbar, click Start, and then click Control Panel.
2. Open the Printers and Faxes control panel.
3. Right-click the HP All-in-One icon, and click Set as default printer.
Mac
1.
Open the Print Center (v10.2.3 or later) or Printer Setup Utility (v10.3 or later)
from the Applications:Utilities folder.
2. Select the HP All-in-One.
3. Click Make Default.
Stop a print job
Although you can stop a print job from either the HP All-in-One or the computer, HP
recommends you stop it from the HP All-in-One for best results.
Cancel
➔ Press the Cancel button on the control panel. If the job does not stop printing,
press Cancel again.
Chapter 4
20 HP PSC 1400 All-in-One series
Print
from
your
computer