Print a self-test report, Work with print cartridges, Replace the print cartridges – HP PSC 1417 All-in-One Printer User Manual
Page 34
Tip
You can also print a self-test report to see if your print cartridges might need to be
replaced. For more information, see
To check the ink levels from the HP Solution Center (Windows)
1.
In the HP Solution Center, click Settings, point to Print Settings, and then click Printer
Toolbox.
2.
Click the Estimated Ink Level tab.
The estimated ink levels for the print cartridges appear.
To check the ink levels from the HP Image Zone software (Mac)
1.
In the HP Image Zone, choose Settings, and then choose Maintain Printer.
2.
If the Select Printer dialog box appears, select your HP All-in-One, and then click Utilities.
3.
From the pop-up menu, choose Ink Level.
The estimated ink levels for the print cartridges appear.
Print a self-test report
If you are experiencing problems with printing, print a self-test report before you replace the print
cartridges.
1.
Load full-sized, unused plain white paper into the paper tray.
2.
Press and hold the Cancel button and then press the Start Copy Color button.
3.
Make sure the test patterns show a complete grid and that the thick colors lines are
complete.
–
If more than a few lines in a pattern are broken, this might indicate a problem with the
nozzles. You might need to clean the print cartridges. For more information, see
–
If the black line is missing, faded, streaked, or shows lines, this might indicate a
problem with the black print cartridge in the right slot.
–
If any of the color lines are missing, faded, streaked, or show lines, this might indicate
a problem with the tri-color print cartridge in the left slot.
Streaks might indicate clogged nozzles or dirty contacts. You might need to clean the print
cartridges. For more information, see
Note
For examples of test patterns, lines of color, and color blocks from normal and
malfunctioning print cartridges, see the onscreen HP Image Zone Help that came with
your software.
Work with print cartridges
To ensure the best print quality from your HP All-in-One, you will need to perform some simple
maintenance procedures. You might also need to check your print cartridges if the Check Print
Cartridge light is on.
Replace the print cartridges
When the ink level for the print cartridge is low, replace the print cartridge. Make sure you have a
replacement print cartridge available before removing the empty print cartridge. You should also
Chapter 8
30
HP PSC 1400 All-in-One series
Maintain your HP
All-in-One