HP PSC 1417 All-in-One Printer - Manual (Page 39)

9 Troubleshooting information
This chapter contains limited troubleshooting information for the HP All-in-One. For more
troubleshooting information, see the onscreen HP Image Zone Help file that came with your
software.
Many issues are caused when the HP All-in-One is connected to the computer using a USB
cable before the HP All-in-One software is installed on the computer. To resolve this problem,
you must follow these steps:
1.
Disconnect the USB cable from the computer.
2. Uninstall the software (if you have already installed it).
3. Restart your computer.
4. Turn off the HP All-in-One, wait one minute, then restart it.
5. Reinstall the HP All-in-One software. Do not connect the USB cable to the computer until
prompted by the software installation screen.
For information about uninstalling and reinstalling the software, see Uninstall and reinstall the
software .
Before you call HP Support
If you have a problem, follow these steps:
1.
Check the documentation that came with the HP All-in-One.
–
Setup Guide: The Setup Guide explains how to set up the HP All-in-One.
– User Guide: The User Guide is the book you are reading.
– HP Image Zone Help: The onscreen HP Image Zone Help describes how to use the
HP All-in-One with a computer and contains additional troubleshooting information not
covered in the User Guide.
– Readme file: The Readme file contains information on possible installation problems.
For more information, see
View the Readme file .
2. If you are unable to solve the problem using the documentation, visit www.hp.com/support
for the following options (availability varies by product, country/region, and language):
–
Online support pages
– Check for software updates
– Send HP an e-mail message for answers to your questions
– Connect with an HP technician by using online chat
3. Contact your local point of purchase.
4. If you are unable to solve the problem using the onscreen Help or HP websites, contact HP
Support. For more information, see
Get HP support .
View the Readme file
You might want to refer to the Readme file for more information on possible installation problems.
●
In Windows, click Start, Programs or All Programs, Hewlett-Packard, HP PSC 1400 All-
in-One series, and then View the Readme File.
● In Mac OS X, you can access the Readme file by double-clicking the icon located in the top-
level folder of the HP All-in-One software CD-ROM.
Setup troubleshooting
This section includes installation and configuration troubleshooting tips for some of the most
common issues associated with software installation and hardware setup.
User Guide 35
Troubleshooting
information