HP PSC 1417 All-in-One Printer - Manual (Page 33)

8 Maintain your HP All-in-One
The HP All-in-One requires little maintenance. Sometimes you might want to clean the glass and
lid backing to remove surface dust and ensure that your copies and scans remain clear. You will
also need to replace, align, or clean your print cartridges occasionally. This chapter provides
instructions for keeping your HP All-in-One in top working condition. Perform these simple
maintenance procedures as necessary.
Clean the HP All-in-One
Fingerprints, smudges, hair, and other debris on the glass or lid backing slow down performance
and affect the accuracy of special features such as Fit to Page. To ensure that your copies and
scans remain clear, you might need to clean the glass and lid backing. You might also want to
dust the exterior of the HP All-in-One.
Clean the glass
1. Turn off the HP All-in-One, unplug the power cord, and raise the lid.
2. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass
cleaner.
Warning Do not use abrasives, acetone, benzene, or carbon tetrachloride on the
glass; they can damage it. Do not place or spray liquid directly on the glass; the
liquid might seep under the glass and damage the device.
3. Dry the glass with a chamois or cellulose sponge to prevent spotting.
Clean the lid backing
1. Turn off the HP All-in-One, unplug the power cord, and raise the lid.
2. Gently clean the white document backing with a soft cloth or sponge slightly moistened with
a mild soap and warm water. Do not scrub.
3. Dry the backing with a chamois or soft cloth.
Caution Do not use paper-based wipes, as these might scratch the backing.
4. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol,
and wipe the backing thoroughly with a damp cloth to remove any residual alcohol.
Caution Be careful not to spill alcohol on the glass or painted parts of the HP All-
in-One, as this might damage the device.
Clean the exterior
Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains off the case. The
interior of the HP All-in-One does not require cleaning. Keep fluids away from the control panel
and the interior of the HP All-in-One.
Caution To avoid damage to painted parts of the HP All-in-One, do not use alcohol or
alcohol-based cleaning products on the control panel, lid, or other painted parts of the
device.
Check the estimated ink levels
You can easily check the ink supply level to determine how soon you might need to replace a
print cartridge. The ink supply level shows an estimate of the amount of ink remaining in the print
cartridges.
User Guide 29
Maintain your HP
All-in-One