HP Color LaserJet 4650 Printer series User Manual
Page 202
2. Grasp the green handle on the transfer unit and pull down. The front cover will open as
the transfer unit is pulled down.
CAUTION
Do not place anything on the transfer unit while it is open. If the transfer unit is punctured,
print quality problems may result.
3. Grasp the media by both corners and pull up.
4. Inspect the media path to ensure that it is clear.
Note
If the media tears, make sure that all media fragments are removed from the paper path
before resuming printing.
5. Firmly lift the two green handles on either side of the fuser to disengage the fuser rollers.
6. Grasp the media by both corners and pull to remove it.
Note
If the media tears, make sure that all media fragments are removed from the paper path
before resuming printing. Do not reach into the fuser until it has cooled.
188
Chapter 8 Problem solving
ENWW