HP Color LaserJet 4650 Printer series - Manual (Page 59)

Menu item Values Description
COLOR/BLACK MIX AUTO
MOSTLY COLOR
PAGES
MOSTLY BLACK
PAGES
This menu item establishes how the
printer switches from color to
monochrome (black and white) mode
for maximum performance and print
cartridge life.
AUTO will reset the printer to the
factory default setting. The default is
AUTO.
Select MOSTLY COLOR PAGES if
nearly all of your print jobs are color
with high page coverage.
Select MOSTLY BLACK PAGES if
you print mostly monochrome print
jobs, or a combination of color and
monochrome print jobs.
TRAY BEHAVIOR USE
REQUESTED
TRAY
MANUALLY
FEED PROMPT
PS DEFER MEDIA
Allows you to specify settings for the
tray selection behavior. (This setting
allows you to configure the trays to
behave like trays in some previous
HP printers and to configure two-
sided printing behavior for pre-printed
paper.)
The default for USE REQUESTED
TRAY is EXCLUSIVELY.
The default for MANUALLY FEED
PROMPT is ALWAYS.
PS DEFER MEDIA affects how paper
is handled when printing from an
Adobe PS print driver. ENABLED
uses HP’s paper handling. Disabled
uses the Adobe PS paper handling.
The default is ENABLED.
See Changing printer control panel
configuration settings for more
information.
POWERSAVE TIME 1 MINUTE
15 MINUTES
30 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURS
Reduces power consumption when
the printer has been inactive for the
period of time specified by this item.
The default is 30 MINUTES.
PERSONALITY AUTO
PDF
PCL
PS
MIME
Sets the default personality to
automatic switching, PCL, PDF, or
PostScript emulation. The default is
AUTO.
ENWW Configure device menu 45