Displaying error messages – HP StorageWorks XP Remote Web Console Software User Manual
Page 34
4.
Right-click the SLPR you want to migrate the CLPR or port to, and select Paste CLPRs, Ports. If you
migrated CLPRs, they are added to the tree and SLPR resource list. If you migrated ports, they
are added only to the SLPR resource list.
NOTE:
You must select an SLPR that has this icon (
) and black characters for the destination
SLPR.
NOTE:
The LUN0000 and LUN0001 belonging to the NAS-Sys host group must belong to the same
SLPR as the NAS port. LUNs from LUN0005 to LUN000A in the NAS system LU must belong
to SLPR0.
5.
Click Apply to apply settings. The progress bar appears.
Displaying error messages
If settings contain a discrepancy, an error message appears when you click Apply. Even if you click
OK or Cancel to close the message after seeing the error message, you can refer to the latest error
message.
1.
Right-click the SLPR in the tree, and select Error Detail.
2.
Click OK to close the message.
Working with SLPRs
34