HP StorageWorks XP Remote Web Console Software - Manual (Page 36)

Corrective Action Error
Check the settings, and migrate the parity group defined to the LU to
the CLPR defined to the SLPR to which the LU migrated, if necessary.
The LUSE volume associated to the parity group administrated in a CLPR
is set across multiple CLPRs.
LUSE volume
A parity group that is administrated
in a CLPR migrated to another CLPR.
Check the settings, migrate the entire LUSE volume to the CLPR to which
the parity group migrated, if necessary.
You are trying to allocate ports in a port block in High Speed mode to
multiple SLPRs. Check the ports' settings, and ensure that all ports in the
port block belong to the same SLPR.
A port in High Speed mode
The port in an SLPR migrated to
another SLPR.
You cannot assign the same name to multiple SLPRs. Name of SLPR
The SLPR name you entered is already used. Enter another name. The SLPR name cannot be changed.
You cannot assign the same name to multiple CLPRs.
Name of CLPR
The CLPR name you entered is already used or reserved by a system.
Enter another name.
The CLPR name cannot be changed.
If you cannot migrate the parity group in a CLPR to another CLPR.
Parity Group
• The specified parity group is concatenated to another parity group.
The parity groups that construct the concatenated parity groups must
belong to the same CLPR. Specify all parity groups that construct the
concatenated parity groups.
The parity group in a CLPR cannot
migrate to another CLPR.
• If you do not click Apply when creating a new CLPR, the parity group
cannot be allocated. Click Apply, and migrate the parity group.
NAS ports in the same channel adapter must belong to the same SLPR.
Migrate all NAS ports in the same channel adapter.
NAS port
The NAS ports in an SLPR migrated
to another SLPR.
You cannot migrate the SSID associated to a CU group that does not
belong to the current CU group. In this case, migrate the SSID:
SSID
You cannot migrate SSIDs.
1. Use the drop-down list for CU groups in the upper right of the XP
Remote Web Console main pane to change the CU group to the
CU group the desired SSID is associated to.
2. Delete the SSID you want to migrate.
3. Use the drop-down list for CU groups in the upper right of the XP
Remote Web Console main pane to switch the CU group to the CU
group the destination SLPR belongs to.
4. Add the SSID.
Troubleshooting 36