HP StorageWorks XP Remote Web Console Software - Manual (Page 35)

5 Troubleshooting
Table 6 provides general troubleshooting instructions for XP Disk/Cache Partition operations.
Table 6 General troubleshooting for XP Disk/Cache Partition
Corrective Action Error
If you logged on to Command View XP or XP Remote Web Console as
the storage partition administrator to use XP Disk/Cache Partition, you
cannot perform any functions. To use XP Disk/Cache Partition:
All XP Disk/Cache Partition
functions cannot be performed.
1. Log on as the storage administrator.
2. Contact the storage administrator and have that person perform XP
Disk/Cache Partition functions.
You can migrate only Target ports to another SLPR. You cannot migrate
Initiator, RCU Target, and External ports. Select a Target port.
Port
The specified port cannot be
migrated to another SLPR.
Only parity groups for open-system user volumes among parity groups
administered in a CLPR can migrate outside of SLPR0. You cannot migrate
parity groups for mainframe volumes. Select parity groups that are not
for mainframe volumes.
Parity group
The parity group administered in a
CLPR cannot migrate to a CLPR in
another SLPR.
Parity groups that contain the NAS system LU (LUN0005, LUN0006,
LUN0008, LUN0009, and LUN000A) cannot migrate outside of SLPR0.
NAS system LU (LUN0000 and LUN0001) must belong to the same SLPR
as the NAS channel adapter.
NAS system LU
The parity group administrated in a
CLPR cannot migrate to a CLPR in
another SLPR.
Check the NAS system LU's settings, and correct the settings if necessary.
For more information about changing NAS system LU settings, contact
your HP account support representative.
LU
• The LU in the parity group administrated in a CLPR is set across
multiple SLPRs.
The parity group administrated in a
CLPR migrated to the CLPR in
another SLPR. • The NAS system LU (LUN0000 and LUN0001) does not belong to
the same SLPR as the NAS channel adapter.
Check the settings, and migrate ports associated to the LU to the SLPR
to which the parity group migrated, if necessary.
LU
• The LU in the parity group administrated in a CLPR is set across
multiple SLPRs.
A CLPR in an SLPR migrated to
another SLPR or a CLPR was
deleted. • The NAS system LU (LUN0000 and LUN0001) does not belong to
the same SLPR as the NAS channel adapter.
Check the settings, and migrate ports associated to the LU to the SLPR
to which the parity group migrated, if necessary.
The LU associated to the port administrated in an SLPR is set across
multiple SLPRs.
LU
A port that is administrated in an
SLPR migrated to another SLPR.
XP Disk/Cache Partition user guide 35