HP StorageWorks 2300 Disk System - Manual (Page 129)

Removal and Replacement 129
Re
m
ova
l a
nd
R
epl
a
ce
m
ent
To reinstall the top cover:
1 Insert the edge of the top cover under the outer sheet metal of the chassis.
2 Slide the cover toward the middle of the chassis, making sure to rotate the top
cover down to align with the edges of the chassis.
3 Insert the three Torx T10 screws through the holes as shown in Figure 59.
4 Tighten the three Torx T10 screws.
5 Reinstall the disk system in the rack. See page 125.
6 Reinstall the disk system retention screws to secure the disk system.
7 Reinstall the power supply/fan modules.