HP Hitachi Dynamic Link Manager Software - Manual (Page 487)

8. Messages
465
Refresh the host information, and then perform the operation again. If the same
error occurs again, execute the
DLMgetras
utility for collecting HDLM error
information, and then contact your HDLM vendor or maintenance company if
you have a maintenance contract for HDLM. For details on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting HDLM Error Information.
1041
Details
An attempt to communicate with the HDLM manager has failed.
Action
Check whether the HDLM manager is running on the host. If it is not running,
start the HDLM manager.
1042
Details
Information about the path configuration on the specified LU does not match the
path configuration information held by HDLM.
Action
Refresh the host information, check the path status, and then perform the
operation again.
1045
Details
A parameter is invalid.
Action
Refresh the host information, and then perform the operation again. If the same
error occurs even again, execute the
DLMgetras
utility for collecting HDLM
error information, and then contact your HDLM vendor or maintenance company
if you have a maintenance contract for HDLM. For details on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting HDLM Error Information.
1046
Details
A parameter is invalid.
Action
Refresh the host information, and then perform the operation again. If the same
error occurs again, execute the
DLMgetras
utility for collecting HDLM error
information, and then contact your HDLM vendor or maintenance company if
you have a maintenance contract for HDLM. For details on the
DLMgetras