HP Hitachi Dynamic Link Manager Software - Manual (Page 81)

3. Creating an HDLM Environment
59
#1
Every SP is applicable, unless otherwise specified.
#2
To set up a boot disk environment that uses Thunder 9500V series, Hitachi AMS/
TMS/WMS series, or Hitachi SMS, use SP2 or a later service pack.
#3
An environment in which the Secure by Default functionality is enabled during
installation of the OS is not supported.
#4
To set up a boot disk environment that uses a storage system of the Thunder
9500V series or the Hitachi AMS2000/AMS/WMS/SMS series, apply SP2 or a
later service pack.
Prerequisite Programs for HDLM
Before you install HDLM, confirm that the required programs written below have been
installed. For details about HTC_ODM and XP_ODM, contact the storage system
vendor.
„ VisualAge C++ Runtime 5.0.0.0 or later, IBM XL C/C++ V7 Runtime 7.0.0.0 to
IBM XL C/C++ V8 Runtime 8.0.0.0 or 8.0.0.6 or later (8.0.0.1 to 8.0.0.5 are not
supported), IBM XL C/C++ V9 Runtime 9.0.0.1 or later, or IBM XL C/C++ V10
Runtime 10.0.0.1 or later, or IBM XL C/C++ V11 Runtime 11.1.0.1 or later
Execute the following command, as applicable, to check the runtime version:
For AIX 5L V5.3:
# lslpp -L xlC.aix50.rte
For AIX V6.1
# lslpp -L xlC.aix61.rte
For AIX V7.1
# lslpp -L xlC.aix61.rte
AIX V7.1 (Virtual I/O Server)
#3 ioslevel 2.1.0.xx to 2.2.0.xx (where xx is a number)
OS Kernel