HP ProLiant DL388e Gen8 Server - Manual (Page 26)

Operations 26
o Primary PCI riser cage
o Secondary PCI riser cage (optional)
The secondary PCI riser cage (PN 688037-001) is optional in a dual-processor configuration. If the
rear SFF drive cage option is not installed, install the rear SFF drive cage blank.
3. Connect all necessary external cabling to the expansion board. For more information on these cabling
requirements, see the documentation that ships with the option.
4. Install the access panel (on page 23 ).
5. Install the server into the rack (" Installing the server into the rack " on page 32 ).
6. Power up the server (on page 19 ).