HP ProLiant DL388e Gen8 Server - Manual (Page 73)

Hardware options installation 73
o Extend the server from the rack (on page 19 ).
o Remove the server from the rack (on page 21 ).
4. Remove the access panel (on page 22 ).
5. Remove the air baffle (on page 23 ).
6. Do one of the following:
o Remove the primary PCI riser cage (" Remove the PCI riser cages " on page 24 ).
o Remove the secondary PCI riser cage (" Remove the PCI riser cages " on page 24 ).
7. Install the GPU. For more information, see the documentation that ships with the GPU option.
8. If you are installing a dual-rank GPU, install the GPU retaining bracket:
o GPU retaining bracket in the primary PCI riser cage
o GPU retaining bracket in the secondary PCI riser cage
9. Connect the GPU power cable to the GPU: