HP ProLiant DL388e Gen8 Server - Manual (Page 77)

Hardware options installation 77
4. Remove the access panel (on page 22 ).
5. Remove the primary PCI riser cage (" Remove the PCI riser cages " on page 24 ).
CAUTION: Any attempt to remove an installed TPM from the system board breaks or disfigures
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to ensure
the integrity of the system data.
6. Install the TPM board. Press down on the connector to seat the board (" System board components " on
page 12 ).
7. Install the TPM security rivet by pressing the rivet firmly into the system board.
8. Install the primary PCI riser cage (" Install the PCI riser cages " on page 25 ).
9. Install the access panel (on page 23 ).
10. Install the server into the rack (" Installing the server into the rack " on page 32 ).
11. Power up the server (on page 19 ).