Agilent Technologies 83438A - Manual (Page 59)

5-5
Servicing
General Information
W A R N I N G To avoid exposure to the laser path of a CLASS IIIb LASER
PRODUCT, do not open the A2A1 assembly. There are no
serviceable components inside. Do not damage the fiber-optic
cable that connects the CLASS IIIb pump laser, A2A3, to the
A2A1 assembly. Other laser paths outside of the A2A1
assembly do not require precautions to maintain safety.
Table 5-1. Internal Labels
This label warns you that removing the A2A1 Fiber Track
Assembly’s cover exposes the path of a CLASS IIIb LASER
PRODUCT. Never remove this cover.
This label identifies the A2A1 Fiber Track Assembly. The
serial and option numbers listed on the label are for the
instrument that the A2A1 assembly is installed in.