HP SAN Virtualization Services Platform - Manual (Page 204)

7. Click Next. The Select PiT screen appears.
Figure 41 Create Snapshot wizard—Select PiT screen
. 8. From the list in the upper area of the screen, select the PiT for which you want to create a snapshot.
9. Click Add. The PiT you selected appears in the lower area of the screen. If you want to change
your choice, select the PiT in the lower area and click Remove.
10. Click Next. The Select Storage Pool screen appears, displaying the list of available storage pools.
Figure 42 Create Snapshot wizard—Select Storage Pool screen
. 11. If you would like to select a storage pool from a folder, navigate to the folder in the tree on the
left of the screen. The Select Storage Pool screen displays the list of storage pools in the selected
folder.
12. Select a storage pool from which you want to allocate capacity to the snapshot.
13. Click Add. The storage pool you selected appears in the lower right area of the screen. If you
want to deselect the storage pool, select the storage pool in the lower right area, and click
Remove.
Using snapshots 204