Level dishwasher (cont) – GE ZBD9900RII User Manual
Page 13
Advertising
13
LEVEL DISHWASHER (CONT)
3. Screw in the back foot completely by turning the
adjustment screw at the front counterclockwise.
Use a flat-bladed or
a 1/4 inch nut driver.
4. Push the plastic feet into place on all three steel
feet (included in document bag).
NOTE:
Do not attach the plastic feet if the installation space
is of minimum height.
5. Push the dishwasher into the
cavity
. At the same
time, pull the electric cable and drainage and supply
hoses through the cable hole.
Advertising