GE ZBD9900RII - Manual (Page 3)

3
Installation Preparation
DISHWASHER CAVITY MEASUREMENTS
Cable Hole
1-1/2” Max DIA.
44 mm DIA.
90°
2-4”
50 -105 mm
* W = 24”
W = 610 mm
H = 34-1/4” to 36-3/8”
H = 870-920 mm
50-83m
m
594 mm
870-920mm
720-800m
m
581mm
34-1/4 to 36-1/8”
23-3/8”
2 to 3-1/4”
22-7/8”
28-3/8 to 31-1/2”
(T
ub
Wi
dth
)
Make sure the edges of the cable
hole are even to avoid damage to
the drain and supply hoses and the
electric cable.
* Actual width of Dishwasher allows for
installation in a 23-5/8” wide cutout.
If optional Stainless Steel door panel
(ZXSS9900) is used, the cutout MUST be
24”.
NOTE: A 24” cutout may require additional
trim work for the inside of the cutout for a
finished appearance.
Dishwasher door shown
without custom panel or
panel kit
CUSTOM PANEL
3/4” thick
19 mm
***23-3/8” to 23-3/4”
594-603mm
** 28-3/8” to 31-1/2”
721-800mm
** Height must be 28-3/8” MIN. - 31-1/2”
MAX. to accommodate different toe kick
heights.
*** Custom panel must have 1/8” min.
clearance on each side for proper fit in
cabinet cutout.