ASKO T761 - Manual (Page 17)

Page 17
ENGLISH
ENGLISH
Start Stop
P1 P2 P3 P4
P1 Extra Dry
P2 Dry
P3 Normal Dry
P4 Iron Dry
Stop Button
Press to stop a
program.
Preset Programs
Press one of these buttons
to select a program.
LCD Window
Displays the program, temperature
settings, and program run time.
Power Button
Press to turn power to
the machine on and off.
Program Selection Controls
These buttons allow you to customize the preset
program settings, such as temperature settings,
turning the buzzer off, setting delay start time, etc.
Power Indicator Light
Glows when the power is
turned on.
Start Button
Press to start a
program.
THE CONTROL PANEL
T761 AND T781 OPERATING INSTRUCTIONS
INTERRUPTING OR CANCELLING
A PROGRAM
To interrupt a program, simply open the door. The dryer
will stop tumbling automatically. To continue the
program, close the door and press Start. The program
will continue from the point it was interrupted.
To cancel a program, press and hold the Stop button
until the dryer stops (about three seconds). To restart
the dryer, you will have to reselect a program and press
Start.
POWER BUTTON
The Power button turns the power to the machine on
and off. When the power is on, the power indicator light
glows red. The power must be on before you can set
the programs or start the machine.
START BUTTON
Once you have selected a program (P1–P4) and set the
desired options, press this button to start the dryer.
STOP BUTTON
You can stop or cancel a program by pressing Stop until
the dryer stops (about three seconds). If you stop the
dryer this way, it cancels the program in progress.
UNDERSTANDING THE LCD WINDOW
Program Time
When you start a program, the total
time the program runs is displayed.
As the program progresses, the time
remaining displays. The program
time toggles between minutes (e.g.,
23) and hours (e.g., 1h).
Stop
Indicates that the program has ended
or that you pressed Stop.
Start
Indicates that you pressed Start and
the program is running.
Preset Programs
Displays the program that is
selected/running.
Program
When you press the Power button,
the display toggles between the
program numbers and the program
names, (e.g., Extra Dry, Dry, etc.)
The LCD window is easy to read and understand. The
illustration below explains each item on the LCD window.
The LCD window also displays the menus and options available when you customize the preset programs (see
page 18).
WARNING! To reduce the risk of electric shock or injury to persons, read the ”Important Safety
Instructions” section on page 2 before operating this appliance.