ASKO T761 - Manual (Page 8)

Page 8
Washer back
Washer back
STACKED INSTALLATION
5. Lift the dryer into
position. Raising the
front edge, push the
dryer backwards
until it engages with
the brackets on the
back of the washer.
6. Carefully lower
the front of the
dryer, making
sure the feet fit
into the plastic
cups.
Tumble dryer
Washer
Stacked Installation
WARNING!
Never stack a washer on top of a dryer!
Total height 67”.
Adjustable to 69”.
Two metal brackets for
securing the dryer to the
washer
Two plastic cups to
secure the dryer legs.
A
B
Plastic cups
ASKO dryers can be mounted on top of any matching
ASKO washer. Mounts are supplied with the machine.
The metal brackets are attached to the lower back of
the unit. The plastic cups are packed inside the dryer.
To install the dryer on top of the washer, follow the steps
below:
1. Remove the two outside screws (A) (20 torx) from
the back of the washer and use them to secure the
metal brackets (B), as illustrated below.
2. To ensure the dryer is correctly positioned on top of
the washer, you will need to align the plastic cups
with the front top edge of the washer. To position the
plastic cups, break off the left tab on the cup to be
placed on the right side of the washer and break off
the right tab on the cup to be placed on the left side
of the washer.
3. Remove the protective paper from the self-adhesive
surface beneath the cups. Being careful not to press
the adhesive surface against the top of the washing
machine, use the tabs to position the cups (as
illustrated below) then press them firmly into place.
4. Once the cups are correctly in place, break off the
remaining plastic tabs.
Washer front