Avaya 1230 - Manual (Page 27)

Using your Avaya 1230 IP Deskphone
27
A steadily lit icon beside a feature key
indicates the feature is active. A flashing icon
indicates the feature is being programmed.
When a call arrives on a feature key that is
not on the currently displayed page of keys,
the IP Deskphone automatically displays the
page with the active key.
Use the Volume control buttons to adjust
the volume of the ringer, handset, headset,
speaker, and Handsfree features. Press the
upper button to increase the volume, and
press the lower button to decrease the
volume.
Your Mute key functionality is enabled or
disabled by your system administrator.
Contact your system administrator to
determine if your
Mute key is enabled. If
your Mute key is enabled, press the Mute
key to listen to the receiving party without
transmitting your voice. Press the
Mute key
again to return to two-way conversation.
Note: If your Mute key is not enabled,
pressing the Mute key places the call on
hold. Press the Mute key again to restore the
active call or press the line key to restore the
active call. You cannot retrieve this call from
hold by pressing the Hold key.
The Mute key applies to handsfree, handset,
and headset microphones. The Mute LED
indicator, located on the Mute key, flashes to
indicate that the microphone is muted.
(Volume +)
(Volume -)
(Mute)