American Fibertek Commander C10e/C10e-I/C10p/C10p-I - Manual (Page 86)

86
Mac Filter
Returning to Default: If mistakes are
made during programming or there is
need to return to default, press the
Default button.
MAC Filter:
MAC Filter displays the MAC addresses available at each of the ports. The total devices
connected to that port will be displayed along with their status as either Dynamic or Static. The
MAC addresses of devices connected to a port will be shown in the list. The total number of
devices connected to Commander is indicated by the Total Number
MAC Aging:
Enable or disable Aging using the drop down menu. Set the duration in seconds from 15 – 3825
seconds. Flushing relearns the devices connected to each port.