American Fibertek Commander C10e/C10e-I/C10p/C10p-I User Manual
Page 94
Advertising
94
QoS Priority Settings
Port Priority:
To change port priority, use the drop down box. 10/100 base ports have 4 priority settings (0 to 3)
and Gig A and B, 1000 base T ports have 8 priority settings (0 to 7). Lower values have a higher
priority in the queue.
QoS Diff Serv Settings
Diff Serv Classes are shown in their 8 class settings by column. Use the drop down menu to
change any of the settings.
Clicking Save will result in a pop up box
appearing asking you to confirm your decision
Advertising