Clinton Electronics CE-20PVMDVR User Manual - Manual (Page 26)

26
Schedule setup
Recording ON / OFF (default value is OFF)
Use to navigate between the hours.
Press or to change the recording types.
( : Motion; : Continuous; Alarm;
_: All modes active; : No mode active)
Motion record
Here you can change the settings for the motion detection.
VIDEO SIZE Here you can set the recording resolution
FRAME RATE Here you can set up how many fps shall be recorded.
QUALITY
Here you can set the recording quality.
DURATION Here you can set how long the device shall record after motion has been detected.
ALARM RECORD
ALARM INPUT : N.C.
SCHEDULE
00 - 23
Alarm record
Here you can change the settings for the alarm recording.
VIDEO SIZE Here you can set the recording resolution.
FRAME RATE Here you can set up how many fps shall be recorded.
QUALITY
Here you can set the recording quality.
DURATION Here you can set how long the device shall record after motion has been detected.
ALARM INPUT Here you can set the type of alarm device (N.C.- normally closed, N.O.- normally open).