Clinton Electronics CE-20PVMDVR User Manual - Manual (Page 7)

7
Power – On/Off function. This will power off both the display and the internal camera.
Menu – To adjust audio, video, signal, tools, language use up & down buttons.
• Push MENU button once.
• Use arrow buttons located around the MENU button to pick category.
• When correct category is chosen, press VOL- and VOL+ buttons to adjust given parameter of
display.
• When adjustment of selected parameter is done, press MENU again to go back to the previous
screen, or simply wait for the menu screen to time out.
Sleep (ZZZ) –Used to set a sleep timer from 10-90 minutes. This will turn the display off after the
programmed amount of time. Continue pressing the sleep button to select the desired time, or
to turn the function off.
TV (source) –Switches video sources. (use to enter DVR menu).
Remote Control
TV (source)
Display Remote
Power
Selection Arrows
Menu
Sleep