Clinton Electronics CE-20PVMDVR User Manual - Manual (Page 9)

9
Feature Controls Menu
1. The SLEEP TIMER is adjustable from 0min to 90min. After which time, the display will time
out until motion
2. The LANGUAGE can be changed to one of the following: English, French, German, Spanish,
Italian, Dutch, Greek, Swedish.
3. In the OSD CONTROL menu you can set the horizontal and vertical position of the OSD
menu, as well as rotate or mirror the menu., and control the duration the menu is on screen
2-16 seconds.
4. The LED light on the front of the unit can be turned on or off using the LED CONTROL
function.
5. In the MESSAGE CONTROL setting, you can turn the message on the bottom of the screen
on or off, as well as select the message to read “WELCOME” or “RECORDING IN PROGRESS”.
You can also control the message to flash on and off, or be steady on.
* 6. Pressing the left (VOL -), or right (VOL +) buttons under the FACTORY RECALL selection will
return all display settings back to the factory defaults. Doing so will void all of your custom
settings.
Audio Menu
1. The Audio Menu will not be used on this unit. It has no impact on the volume of the motion
chime that is set on the back of the unit. The MUTE function on the remote also has no
impact on the motion chime.