Clinton Electronics CE-PTZ-KEY User Manual
Page 4
4
Precautions
For all service or installation needs, please refer to qualified service personnel or system installers
Do not attempt to disassemble the device
To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside.
Contact qualified service personnel for maintenance
Handle the device with care
Do not strike or shake, as this may damage the device. It should be protected against extreme pressure,
vibration, and humidity during transportation and storage. Damages caused by improper transportation
may void the warranty.
Do not operate the device beyond its specified temperature, humidity, or power source ratings.
Do not use the dome camera in an extreme environment where high temperature or high humidity
exists.
Do not install this product in a flammable and explosive environment.
Make sure that the installation is done according to your local electricity and safety regulations.
Before installation or maintenance, make sure the device is disconnected from the power source.
Do not use any power source other than 12vdc in order to prevent damages to this device.
For details, please refer to the “Specifications” section for further details.
Handle the device during the installation carefully.
Falls, or extreme vibration may cause irreparable damages and void the warranty.
Do not install or operate the device near any high voltage devices or high voltage cable.
The safety distance should remain at least 50m.
This product should be operated indoor only.