EOTech ATPIAL (AN/PEQ-15) - ADVANCED TARGET POINTER ILLUMINATOR AIMING LIGHT User Manual
Page 42
Advertising
2-20
2.9 MODE ACTIVATION (Continued)
CAUTION
When the Remote Cable Switch is plugged into
the remote jack, it automatically locks in place. To
remove it, pull back on the cable sleeve. Do not
remove the Remote Cable Switch by pulling on the
cable itself.
NOTE
The ATPIAL comes with a jack plug installed in the
remote jack that must be removed and stored
before installing the Remote Cable Switch.
Figure 2-12. Installation of the Remote Cable Switch.
CABLE
SLEEVE
Advertising