EOTech ATPIAL (AN/PEQ-15) - ADVANCED TARGET POINTER ILLUMINATOR AIMING LIGHT - Manual (Page 43)

2-21
2.9 MODE ACTIVATION (Continued)
Dual Button Remote
The optionally available Dual Button Remote (DBR) is
operated in the same manner as the standard Remote Cable
Switch. However, in addition to remote activation of the
ATPIAL, it also provides control over a second electro-
optical device (e.g., M3X, etc.).
The DBR may be mounted on a MIL-STD-1913 rail as
follows:
1. Position the DBR with the recoil lug aligned with the
desired recoil groove of the weapon’s rail.
2. Hook the moveable jaw of the DBR under the rail (see
Figure 2-13).
3. Squeeze the DBR clamp to open the moveable jaw, and
“roll” the fixed jaw onto the weapon rail until it clicks into
place and is firmly secured.
Figure 2-13. Mounting the DBR.
MOVEABLE JAW
FIXED JAW
RECOIL LUG