Alpine VPA-B222R - Manual (Page 19)

18
-EN
01GB05VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
Connecting the Navigation
If an Alpine navigation system is connected, make the necessary
settings in “Setting the Navigation/Speaker Input Voice Interruption”
(page 17). Also make the following settings.
When you connect optional navigation equipment, set to ON.
Setting item: NAV.
Setting contents: OFF / ON
With an Alpine navigation system connected to the VPA-B222R, the
voice guidance of the navigation system will be mixed with the DVD or
CD playback sound.
You can adjust the volume level of the voice guidance.
Setting item: NAV. MIX LV
Setting contents: 0 to 15
• When NAV. is turned on, the setting can be made. Refer to "Setting
the Navigation Mode" (page 18).
Connecting an External Input Device
(AUX)
If an external input device is connected, make the following settings.
Setting item: AUX IN-1, 2, 3
Setting content: OFF / ON
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• AUX IN-3 is adjustable when the external expansion box (VPE-S431)
is connected.
• OFF is not displayed when a DVD player or DVD changer is
connected with the optional Ai-NET.
• When either a DVD player or DVD changer is connected to AUX IN
1, DVD is displayed on the screen. When both of them are connected,
DVD is displayed for AUX IN 1 and DVD CHANGER is displayed for
AUX IN 2.
When more than one external device is connected, you can name each
(up to 3) as you like.
Setting items: NAME
Setting contents: AUX / VCR / GAME-1,2 / TV / EXTDVD* / DVB-T
• The setting can be made when ON is set in "Setting the AUX Mode"
(page 18).
• The selected source name is displayed instead of AUX source name.
If selecting TV/EXT.DVD/DVB-T as the source, the screen will
change to the function screen of that source.
• Only when an Alpine TV tuner is connected, can you operate the
displayed function guide from this unit.
• If an Ai-NET compatible DVD player/DVD changer is connected,
names are automatically set, however, they cannot be changed.
* “EXT.DVD” is displayed on the source selection screen when a DVD
player is connected, and “DVD-1-3” is displayed on the source
selection screen when the NAME setting is set to “EXTDVD” on
more than one AUX (included when an external Ai-NET compatible
DVD player is connected).
Setting item: LEVEL
Setting content: LOW / HIGH
• The adjustment is available when ON is set in "Setting the AUX
Mode" (page 18).
Connecting the Rear Monitor
If the rear monitor is connected, make the following each setting
Set it to ON when you use the rear entertainment function (page 12).
Setting items: MONITOR-1, 2
Setting contents: OFF / ON
• This setting can be made if optional expansion box VPE-S431 is
connected.
Note that this setting is enabled only when the optional expansion box
(VPE-S431) is connected.
Setting item: VISUALIZER
Setting contents: MODE-1-MODE-6 / SCAN / OFF
• VISUALIZER can be displayed in a rear monitor when mode is set to
other than OFF. Set the source of the rear monitor to VISUAL. to
display VISUALIZER in the rear monitor. For the rear monitor's
setting, refer to “Rear Entertainment Function” (page 12).
Setting the Navigation Mode
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation cannot be changed from this unit.
Navigation Audio Interruption Volume
Adjustment
Setting the AUX Mode
OFF: AUX source is not displayed.
ON: AUX source is displayed.
Naming External Devices
Adjusting the External Input Audio Level
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level
Setting of the External Monitor Output
ON: By setting the connected external monitor to ON, the
remote control will be usable.
OFF: When either MONITOR-1 or 2 is set to OFF, only one
monitor can be set by the rear entertainment function.
When both MONITOR-1 and 2 are set to OFF, the rear
entertainment function cannot be used.
Setting the VISUALIZER Mode Display
MODE-1 to
MODE-6 / OFF: Recalls the maker’s setting mode on the
expansion box (VPE-S431).
SCAN: Displays the pattern of MODE-1 to MODE-6
repeatedly.
01GB00VPAB222R.book Page 18 Monday, January 23, 2006 4:24 AM