Alpine VPA-B222R - Manual (Page 29)

28
-EN
01GB05VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
Map Screen Function
1
Press NAV./POS. while displaying the map screen.
The current position screen is displayed.
1
Press the joystick.
The map scrolls in the direction the joystick is pressed.
1
Press or .
Each press of the button changes the map scale. Pressing
and holding changes the scale continuously.
Menu Screen Function
1
Press /MENU/FUNC. in the Navigation mode.
The Navigation Menu screen is displayed.
2
Press the joystick up, down, left or right to select
the desired item.
3
Press / /ENTER.
• Press TA/RTN/SETUP to return to the previous screen.
When connected to an Alpine TV unit (sold separately), you can use the
commander supplied with the VPA-B222R to operate the TV. Set the
AUX NAME to TV. Refer to "Naming External Devices" page 18.
• When the optional expansion box (VPE-S431) is connected, connect
TV to AUX IN-2, 3.
• Be sure to connect this unit or VPE-S431 remote control output lead
to the TV unit's remote control input lead.
• For details, refer to the owner's manual of the digital TV unit.
Operating TV Unit
• If you try to activate the TV unit while driving, the display will show
the warning-PICTURE OFF FOR YOUR SAFETY.
Displaying the Current Position
Scrolling the Map
Changing the Map Scale
TV Operation
(Optional)
WARNING
It is dangerous for the driver to watch the TV while
driving the vehicle. The driver may be distracted from
looking ahead and an accident could occur.
Install the VPA-B222R correctly so that the driver
cannot watch TV unless the vehicle is stopped and
the emergency brake is applied.
If the VPA-B222R is not installed correctly, the driver
will be able to watch the TV while driving the vehicle
and may be distracted from looking ahead and cause
an accident. The driver or other people could be
severely injured.
Joystick
01GB00VPAB222R.book Page 28 Monday, January 23, 2006 4:24 AM