Alpine VPA-B222R - Manual (Page 20)

19
-EN
01GB05VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
Connecting a Subwoofer
When a subwoofer is connected, set to ON.
Setting item: SUBW
Setting contents: ON / OFF
• When an external audio processor is connected, refer to “Setting the
Speakers” (page 32) for setting.
Setting the Commander
The colour/brightness, etc., of buttons lighting on the commander
supplied with the unit can be adjusted.
You can set the illumination colour of the commander buttons.
Setting items: ILLUM COLOR
Setting content: BLUE / RED
You can select whether the commander button illumination remains lit
or blinks when no operation is performed for 5 minutes.
Setting items: CMNDR LIGHT.
Setting content: ON / OFF
With AUTO set, when the headlights are turned on, the commander
button illumination dims. During the night, if the commander button
illumination is too bright, this setting is recommended.
Setting items: DIMMER
Setting content: OFF / ON / AUTO
Setting the Others
If an Alpine Versatile Link Terminal (KCA-410C) is connected to the
VPA-B222R, an Auxiliary Source will be allowed to interrupt the
current audio source. For example, you can listen to a portable MP3
player through your car audio system even with a CD changer
connected and playing. The CD changer will automatically mute when
switched to the AUX Input. For further details on how to use the Alpine
KCA-410C, see your authorized Alpine dealer.
Setting item: IN-INT MUTE
Setting content: OFF / ON
• The auxiliary device being connected must have an interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
Depending on the connected monitor, the display may move out of
position. During touch panel operation, if the position between the
display on the LCD and the display of the touch panel does not match,
adjust the display position.
Setting items: SCREEN ADJ
Setting content:
Adjustment if a monitor not compatible with touch panel
operation is connected.
The screen position within the display is adjustable. The position is
controlled from the commander.
1 In the SCREEN ADJ mode, press the joystick right.
The adjustment screen appears.
2 Press the joystick up, down, left or right to adjust the
display position.
3 Press / /ENTER.
The adjustment is complete, and the display returns to
the main source screen.
Adjustment if a touch panel compatible monitor is connected.
The screen and soft button positions are adjustable within the
display. The position is controlled from the soft buttons.
1 Touch [ ] of SCREEN ADJ.
2 Touch [ ], [ ], [ ] or [ ] to adjust the display position,
and touch [ENT].
The TOUCH LOCATE screen is displayed.
3 Touch the centre of the mark displayed in the lower left
of the screen.
The screen changes to the adjustment screen.
4 Touch the centre of the mark displayed in the upper
right of the screen, then touch [ENT].
The adjustment is complete, and the display returns to
the main source screen.
Subwoofer On and Off
ON: Subwoofer output is on.
OFF: Subwoofer output is off.
Setting the Colour of the Commander
Button illumination
BLUE: When a source other than navigation is activated,
illumination is blue. When the navigation is activated,
illumination is red.
RED: When a source other than navigation is activated,
illumination is red. When navigation is activated,
illumination is blue.
Turning the Commander Button
illumination on and off
ON: Commander button illumination blinks.
OFF: Commander button illumination stays lit (does not blink).
Adjusting the Brightness of the
Commander Button illumination
OFF: Brightness of the commander button illumination is
maximum.
ON: Brightness of the commander button illumination is
decreased.
AUTO: When the headlights are turned on, the commander
button illumination dims.
Setting the External Device Interrupt Mode
OFF: Sound will be output in Interrupt mode.
ON: Sound will not be output in Interrupt mode.
Adjusting the display position
01GB00VPAB222R.book Page 19 Monday, January 23, 2006 4:24 AM