AMX MIO R-1 AUDIO FG147-04 - Manual (Page 11)

Programming The MIO R-1 AUDIO
7 MIO R-1 AUDIO
Configuration Mode
The configuration mode allows you to set the following device features:
IR Transmit Mode (38 KHz or 455 KHz)
Timeout Adjustment
Download Mode
Debug Mode
Battery Type
LED Awake Brightness
Sleep Brightness
To enter configuration Mode:
1. Press and hold the STOP button and the INPUT button. The two buttons must be pressed within 0.1
seconds of each other and held down for 2 seconds. The device indicates you are now in
configuration mode. See below for available modes.
2. Press the EXIT key when you are finished.
Note: Your settings will not be lost in the event your batteries die or are removed.
IR Transmit Mode
Pressing button "1" on the remote toggles the IR transmission mode between 38Khz and 455Khz. The
display indicates the current mode.
Timeout Adjustment
Press button "2" on the remote to change the sleep timeout from the default. Each time "2" is pressed, the
sleep timeout raises incrementally. The pre-determined sleep time-outs are:
3 seconds
6 seconds
9 seconds
12 seconds
The display indicates the selected sleep timeout.
Download Mode
Pressing "3" on the remote toggles the Download mode OFF and ON. The Download mode must be ON
before you can download a file to the MIO R-1 AUDIO. While the Download mode is ON the device
will not go to sleep. A power cycle will return the device to Download OFF.
IR Code Matrix (Cont.)
Button Label Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6
41 S. REV Z 7 47 87 127 167 207
42 PLAY A 1 41 81 121 161 201
43 S. FWD Y 6 46 86 126 166 206
44 REW E 5 45 85 125 165 205
45 FWD D 4 44 84 124 164 204