AMX MIO R-1 AUDIO FG147-04 - Manual (Page 19)

Using the MIO R-1 AUDIO Remote
15 MIO R-1 AUDIO
Using the MIO R-1 AUDIO Remote
Tone Control & SRS Setting
To access the Tone Control and SRS settings, press the TONE button (FIG. 1). This enables the Tone Control
Mode with BASS as the first mode selected.
There are 3 Tone Control Modes available for adjustment, and 4 SRS options, as follows:
BASS: Increase / Decrease from -10dB to +10dB (Up/Down NAV buttons)
Treble: Increase / Decrease from -10dB to +10dB (Up/Down NAV buttons)
Balance: Left / Right (Up NAV button = right, Down NAV button = left)
SRS options: BASS Boost, Focus, 3D, WOW
When first entering Tone Control Mode, BASS mode is active. To move from mode to mode, select the Center
NAV button. This saves the setting and moves to the next mode.
SRS (WOW, Bass Boost, 3D and Focus) Settings
Use the UP Nav button to cycle through the SRS Settings: BASS Boost, Focus, 3D, WOW (in that order).
Use the Down NAV button to cycle backwards to the previous SRS setting.
Press & hold the Center NAV button to disengage/clear the SRS settings (none of the SRS modes
will be engaged).
Press the Center NAV button save SRS Mode & exit from Tone Control set-up.
Only one SRS mode can be engaged per room/zone. Each room/zone, however, can have a different SRS
mode.
Moving from one SRS position to another disengages the original setting (for example, moving from WOW to
BASS BOOST disengages WOW).
FIG. 1 TONE button
TONE button
While in each of the modes, press the Center NAV button to return to the default for
that mode.
FIG. 2 Center NAV button
Center NAV button
NAV Up
NAV Down